The rise, suitable for use on Panda 4x4 mod. 169, increases the height of the car by about 15mm from the ground.
The kit consists of elements for the front rise, the rear and the repositioning of the rear anti-roll bar.
This kit has been developed specifically for the New Panda and offers two exclusive novelties:
1. An innovative geometry of the front thicknesses greatly simplifies assembly and does not require rewiring. This drastically reduces installation costs and does not affect system functionality.
2. At the rear, in combination with the classic spring thicknesses, we also provide the components to reposition the anti-roll bar; this allows the bar to work in favorable conditions despite the rise.
The installation does not require irreversible changes to the car, so it will always be possible to return to the original trim conditions.
Further technical information:
-It was decided to contain the increase in height in 15mm in order to maintain a good suspension excursion, thus ensuring a good "copibility" of the ground.
Recall that 15mm on a car with the short wheelbase as the Panda are not few.
-The Prometeo booster kit has been designed to allow a quick and easy installation; this allows to significantly reduce the intervention costs. For costs and installation times we ask, as always, to contact our installers.
We now provide some measurements detected on a Panda 4x4 equipped with the Prometeo +15mm booster kit and equipped with 185/65 R14-tires.
Minimum height from the ground measured under front bumper ~18 cm
Minimum height from the ground measured under the rear differential ~24 cm
Fiat Panda 4x4 mod. 169
The rise in the front area